Cutter Pro Chainsaw Winter Gloves

Cutter Pro Chainsaw Winter gloves are thermal and therefore, are for use in cold conditions.

These superb gloves protect you in many ways.

Tough but supple for added comfort, they are ideal when you work all day in the cold.

They are also certified to EN381-7 for chainsaw protection.

The main climbing techniques in tree work are either:

• Work positioning, e.g. changeover climbing using a harness, friction knot and climbing line); or
• Rope access and positioning, e.g. footlocking or single rope technique (SRT).

In the tree, where possible, the system should be securely attached to two load-bearing anchor points. Each anchor point should be strong enough to support the climber, work equipment and any foreseeable loading.

Work positioning systems should only be used if there is a suitable backup system for preventing or arresting a fall. If the backup system includes a second line, the user must be connected to it. If it is not reasonably practicable to have a backup system, you need to make sure that the work positioning system doesn't fail – for example by:

• Training
• Using properly chosen equipment
• Choosing reliable anchor points
• Following industry and HSE guidance
• Correct use of tools.

Rope access and positioning should only be used if there are at least two separately anchored lines & one the working line and the other a safety line. The user must be connected to both lines using a suitable harness. The working line should be equipped with a safe means of ascent and descent and have a self-locking design to prevent the user falling if they lose control. The safety line must be equipped with a mobile fall protection system connected to, and travelling with, the user of the system.